solar

Combiner + Cable Harness Solutions

Bentek UTS logo - white outline

Bentek Combiners

Bentek has developed combiners to support Utility-Scale projects; BSA (standard amperage) combiners with up to 30 inputs with fuses up to 32A and BHA (high amperage) combiners with up to 14 inputs with fuses up to 90A. These were specifically designed to provide the project designers, owners, engineers, etc. with the most flexibility and the highest level of quality in the market.
Bentek Combiner

Bentek UTS4+ Standard Amperage (BSA) Combiner

    • Standard features:
      • 500A 2P disconnect
      • Surge production Type II
      • NEMA4X breather vent
      • NEMA3R/4 powder-coated carbon steel enclosure
      • Up to 30 inputs
      • Bentek fuses: 15/20/25/30/32A
    • Optional features
      • NEMA4X fiberglass enclosure
      • Pre-installed whips (#10/#8/#6AWG wire)
      • Pre-installed electro-galvanized or hot-dipped galvanized struts (for mounting)
      • Cord grips / glands for DC outputs / EGC / etc.
      • Conduit cutouts
    • BSA Data Sheet

Bentek UTS4+ High Amperage (BHA) Combiner

    • Standard features:
      • 500A 2P disconnect
      • Surge production Type II
      • NEMA4X breather vent
      • NEMA3R/4 powder-coated carbon steel enclosure
      • Up to 14 inputs
      • Bentek fuses: 20-90A
    • Optional features
      • NEMA4X fiberglass enclosure
      • Pre-installed whips (#10/#8/#6AWG wire)
      • Pre-installed electro-galvanized or hot-dipped galvanized struts (for mounting)
      • Cord grips / glands for DC outputs / EGC / etc.
      • Conduit cutouts
    • BHA Data Sheet
1
2
3
Bentek full solution diagram
1
2
3
Bentek full solution diagram

Cable and Harness Solutions

  • Bentek Trunk-bus Over-mold (BTO)

    Customized for your specific need, our cable harness assemblies allow paralleling of multiple strings to either a combiner or a trunk-bus.  BTO Data Sheet

  • Bentek Panel Extender Harnesses

    Used to connect the panel strings and/or parallel panel harnesses to combiners or trunk-bus lines. Cut-to-length and terminated for each specific location; available in a range of wire sizes and with any industry standard connectors.

Wire Options

Bentek branded PV wire is available in all industry standard sizes and colors. Links to data sheets are listed below.

Bentek #6AWG Wire – Data Sheet (102 Wire Strands)
Bentek #8AWG Wire – Data Sheet (65 Wire Strands)
Bentek #10AWG Wire – Data Sheet (19 Wire Strands)